One of the coolest innovations to hit the bathroom interior scene is the undisputed Toto toilet. Unlike mainstream variants, these do not require the use of paper towels. Toto toilets include a carefully positioned bidet that washes you once you’re done going to the loo.
Because of their primary purpose and the bidet placement, these can get dirty sooner than ordinary ones, head to Ram Research to read more about these as well as Kohler Cimmaron & the American Standard Cadet toilets. In fact, when they’re not properly cleaned, using them can be a severe concern for hygiene and may even lead to certain infections. That said, just because there’s an extra functionality in the mix doesn’t mean these toilets can’t be cleaned. Here’s what you need to do. You can also check out great bathroom ideas here https://exposedmagazine.co.uk/featured-articles/how-to-create-an-eco-friendly-bathroom/
1. Clean the bowl
The first step in the process is pretty generic; you’re supposed to clean a Toto toilet just like you would an ordinary one. Begin by putting on some hand gloves – remember, this step should not be missed! Sometimes even when you wash your hands, the debris caught under your nails can do some severe damage to your health.
Then, proceed by putting a concentrated toilet cleaner all over the bowl, and get to scrubbing with a toilet brush. Let the chemicals sit for a while so the debris softens, after which you should wash it off with hot water. If your toilet’s really dirty, you can repeat this process for the best results. Ultimately, finish off with a germ-killing spray to ensure no bacteria are lurking around on the surfaces.
2. Clean the bidet
The process for cleaning a Toto toilet is only different because of this step, in that, once you’re done washing the bowl, you need to move your attention to the bidet. This piece of equipment can accumulate a lot of dirt simply because it is responsible for cleaning the humans that use it. And while a bidet is not fragile, it obviously cannot be cleaned with a toilet brush. Doing so might end up breaking it if you’re too harsh.
Therefore, grab a sponge with one end fitted with a rough surface, and put some toilet cleaning liquid on top. Press the sponge in your hand a few times, so it starts foaming up – this isn’t necessary, but it helps with deeper cleaning. Then, while holding the bidet in place with one hand, rub the sponge all over it and make sure to get out any stains before rinsing it off with hot water.
3. Clean the outside
While the outside of a Toto toilet may not seem icky at first glance, it has a fair amount of germs on it. Flushing without the lid on or even only using the bathroom suspends particles in the air that settle outside the bowl.
For this step, you’ll need to remove all the things next to your toilet as the area will get wet. To clean the external walls, simply take some toilet cleaner and put it over your scrubber, then rub that all over the outside walls and wash it off with hot water.
